malloc & sysmalloc
Reading time: 36 minutes
tip
Aprende y practica AWS Hacking:HackTricks Training AWS Red Team Expert (ARTE)
Aprende y practica GCP Hacking: HackTricks Training GCP Red Team Expert (GRTE)
Apoya a HackTricks
- Revisa los planes de suscripción!
- Únete al 💬 grupo de Discord o al grupo de telegram o síguenos en Twitter 🐦 @hacktricks_live.
- Comparte trucos de hacking enviando PRs a HackTricks y HackTricks Cloud repos de github.
Resumen del Orden de Asignación
(No se explican verificaciones en este resumen y se han omitido algunos casos por brevedad)
__libc_malloc
intenta obtener un chunk del tcache, si no, llama a_int_malloc
_int_malloc
:- Intenta generar la arena si no hay ninguna
- Si hay algún chunk de fast bin del tamaño correcto, úsalo
- Rellena el tcache con otros chunks rápidos
- Si hay algún chunk de small bin del tamaño correcto, úsalo
- Rellena el tcache con otros chunks de ese tamaño
- Si el tamaño solicitado no es para small bins, consolida fast bin en unsorted bin
- Verifica el unsorted bin, usa el primer chunk con suficiente espacio
- Si el chunk encontrado es más grande, divídelo para devolver una parte y añade el resto de vuelta al unsorted bin
- Si un chunk es del mismo tamaño que el tamaño solicitado, úsalo para llenar el tcache en lugar de devolverlo (hasta que el tcache esté lleno, luego devuelve el siguiente)
- Para cada chunk de tamaño menor revisado, colócalo en su respectivo small o large bin
- Verifica el large bin en el índice del tamaño solicitado
- Comienza a buscar desde el primer chunk que sea más grande que el tamaño solicitado, si se encuentra alguno, devuélvelo y añade los restos al small bin
- Verifica los large bins desde los siguientes índices hasta el final
- Desde el siguiente índice más grande, verifica si hay algún chunk, divide el primer chunk encontrado para usarlo para el tamaño solicitado y añade el resto al unsorted bin
- Si no se encuentra nada en los bins anteriores, obtén un chunk del top chunk
- Si el top chunk no era lo suficientemente grande, amplíalo con
sysmalloc
__libc_malloc
La función malloc
en realidad llama a __libc_malloc
. Esta función verificará el tcache para ver si hay algún chunk disponible del tamaño deseado. Si lo hay, lo usará y si no, verificará si es un hilo único y en ese caso llamará a _int_malloc
en la arena principal, y si no, llamará a _int_malloc
en la arena del hilo.
__libc_malloc código
// From https://github.com/bminor/glibc/blob/master/malloc/malloc.c
#if IS_IN (libc)
void *
__libc_malloc (size_t bytes)
{
mstate ar_ptr;
void *victim;
_Static_assert (PTRDIFF_MAX <= SIZE_MAX / 2,
"PTRDIFF_MAX is not more than half of SIZE_MAX");
if (!__malloc_initialized)
ptmalloc_init ();
#if USE_TCACHE
/* int_free also calls request2size, be careful to not pad twice. */
size_t tbytes = checked_request2size (bytes);
if (tbytes == 0)
{
__set_errno (ENOMEM);
return NULL;
}
size_t tc_idx = csize2tidx (tbytes);
MAYBE_INIT_TCACHE ();
DIAG_PUSH_NEEDS_COMMENT;
if (tc_idx < mp_.tcache_bins
&& tcache != NULL
&& tcache->counts[tc_idx] > 0)
{
victim = tcache_get (tc_idx);
return tag_new_usable (victim);
}
DIAG_POP_NEEDS_COMMENT;
#endif
if (SINGLE_THREAD_P)
{
victim = tag_new_usable (_int_malloc (&main_arena, bytes));
assert (!victim || chunk_is_mmapped (mem2chunk (victim)) ||
&main_arena == arena_for_chunk (mem2chunk (victim)));
return victim;
}
arena_get (ar_ptr, bytes);
victim = _int_malloc (ar_ptr, bytes);
/* Retry with another arena only if we were able to find a usable arena
before. */
if (!victim && ar_ptr != NULL)
{
LIBC_PROBE (memory_malloc_retry, 1, bytes);
ar_ptr = arena_get_retry (ar_ptr, bytes);
victim = _int_malloc (ar_ptr, bytes);
}
if (ar_ptr != NULL)
__libc_lock_unlock (ar_ptr->mutex);
victim = tag_new_usable (victim);
assert (!victim || chunk_is_mmapped (mem2chunk (victim)) ||
ar_ptr == arena_for_chunk (mem2chunk (victim)));
return victim;
}
Nota cómo siempre etiquetará el puntero devuelto con tag_new_usable
, del código:
void *tag_new_usable (void *ptr)
Allocate a new random color and use it to color the user region of
a chunk; this may include data from the subsequent chunk's header
if tagging is sufficiently fine grained. Returns PTR suitably
recolored for accessing the memory there.
_int_malloc
Esta es la función que asigna memoria utilizando los otros bins y el top chunk.
- Inicio
Comienza definiendo algunas variables y obteniendo el tamaño real que el espacio de memoria solicitado necesita tener:
_int_malloc inicio
// From https://github.com/bminor/glibc/blob/f942a732d37a96217ef828116ebe64a644db18d7/malloc/malloc.c#L3847
static void *
_int_malloc (mstate av, size_t bytes)
{
INTERNAL_SIZE_T nb; /* normalized request size */
unsigned int idx; /* associated bin index */
mbinptr bin; /* associated bin */
mchunkptr victim; /* inspected/selected chunk */
INTERNAL_SIZE_T size; /* its size */
int victim_index; /* its bin index */
mchunkptr remainder; /* remainder from a split */
unsigned long remainder_size; /* its size */
unsigned int block; /* bit map traverser */
unsigned int bit; /* bit map traverser */
unsigned int map; /* current word of binmap */
mchunkptr fwd; /* misc temp for linking */
mchunkptr bck; /* misc temp for linking */
#if USE_TCACHE
size_t tcache_unsorted_count; /* count of unsorted chunks processed */
#endif
/*
Convert request size to internal form by adding SIZE_SZ bytes
overhead plus possibly more to obtain necessary alignment and/or
to obtain a size of at least MINSIZE, the smallest allocatable
size. Also, checked_request2size returns false for request sizes
that are so large that they wrap around zero when padded and
aligned.
*/
nb = checked_request2size (bytes);
if (nb == 0)
{
__set_errno (ENOMEM);
return NULL;
}
Arena
En el improbable caso de que no haya arenas utilizables, utiliza sysmalloc
para obtener un bloque de mmap
:
_int_malloc no arena
// From https://github.com/bminor/glibc/blob/f942a732d37a96217ef828116ebe64a644db18d7/malloc/malloc.c#L3885C3-L3893C6
/* There are no usable arenas. Fall back to sysmalloc to get a chunk from
mmap. */
if (__glibc_unlikely (av == NULL))
{
void *p = sysmalloc (nb, av);
if (p != NULL)
alloc_perturb (p, bytes);
return p;
}
Fast Bin
Si el tamaño necesario está dentro de los tamaños de Fast Bins, intenta usar un chunk del fast bin. Básicamente, según el tamaño, encontrará el índice del fast bin donde deberían estar ubicados los chunks válidos, y si hay alguno, devolverá uno de esos.
Además, si tcache está habilitado, llenará el tcache bin de ese tamaño con fast bins.
Mientras se realizan estas acciones, se ejecutan algunas verificaciones de seguridad aquí:
- Si el chunk está desalineado:
malloc(): unaligned fastbin chunk detected 2
- Si el chunk hacia adelante está desalineado:
malloc(): unaligned fastbin chunk detected
- Si el chunk devuelto tiene un tamaño que no es correcto debido a su índice en el fast bin:
malloc(): memory corruption (fast)
- Si algún chunk utilizado para llenar el tcache está desalineado:
malloc(): unaligned fastbin chunk detected 3
_int_malloc fast bin
// From https://github.com/bminor/glibc/blob/f942a732d37a96217ef828116ebe64a644db18d7/malloc/malloc.c#L3895C3-L3967C6
/*
If the size qualifies as a fastbin, first check corresponding bin.
This code is safe to execute even if av is not yet initialized, so we
can try it without checking, which saves some time on this fast path.
*/
#define REMOVE_FB(fb, victim, pp) \
do \
{ \
victim = pp; \
if (victim == NULL) \
break; \
pp = REVEAL_PTR (victim->fd); \
if (__glibc_unlikely (pp != NULL && misaligned_chunk (pp))) \
malloc_printerr ("malloc(): unaligned fastbin chunk detected"); \
} \
while ((pp = catomic_compare_and_exchange_val_acq (fb, pp, victim)) \
!= victim); \
if ((unsigned long) (nb) <= (unsigned long) (get_max_fast ()))
{
idx = fastbin_index (nb);
mfastbinptr *fb = &fastbin (av, idx);
mchunkptr pp;
victim = *fb;
if (victim != NULL)
{
if (__glibc_unlikely (misaligned_chunk (victim)))
malloc_printerr ("malloc(): unaligned fastbin chunk detected 2");
if (SINGLE_THREAD_P)
*fb = REVEAL_PTR (victim->fd);
else
REMOVE_FB (fb, pp, victim);
if (__glibc_likely (victim != NULL))
{
size_t victim_idx = fastbin_index (chunksize (victim));
if (__builtin_expect (victim_idx != idx, 0))
malloc_printerr ("malloc(): memory corruption (fast)");
check_remalloced_chunk (av, victim, nb);
#if USE_TCACHE
/* While we're here, if we see other chunks of the same size,
stash them in the tcache. */
size_t tc_idx = csize2tidx (nb);
if (tcache != NULL && tc_idx < mp_.tcache_bins)
{
mchunkptr tc_victim;
/* While bin not empty and tcache not full, copy chunks. */
while (tcache->counts[tc_idx] < mp_.tcache_count
&& (tc_victim = *fb) != NULL)
{
if (__glibc_unlikely (misaligned_chunk (tc_victim)))
malloc_printerr ("malloc(): unaligned fastbin chunk detected 3");
if (SINGLE_THREAD_P)
*fb = REVEAL_PTR (tc_victim->fd);
else
{
REMOVE_FB (fb, pp, tc_victim);
if (__glibc_unlikely (tc_victim == NULL))
break;
}
tcache_put (tc_victim, tc_idx);
}
}
#endif
void *p = chunk2mem (victim);
alloc_perturb (p, bytes);
return p;
}
}
}
Small Bin
Como se indica en un comentario, los pequeños bins contienen un tamaño por índice, por lo tanto, verificar si hay un chunk válido disponible es muy rápido, así que después de los fast bins, se revisan los small bins.
La primera verificación es averiguar si el tamaño solicitado podría estar dentro de un small bin. En ese caso, obtén el índice correspondiente dentro del smallbin y verifica si hay algún chunk disponible.
Luego, se realiza una verificación de seguridad comprobando:
- si
victim->bk->fd = victim
. Para ver que ambos chunks están correctamente enlazados.
En ese caso, el chunk obtiene el bit inuse
, la lista doblemente enlazada se corrige para que este chunk desaparezca de ella (ya que va a ser utilizado), y se establece el bit de arena no principal si es necesario.
Finalmente, llena el índice tcache del tamaño solicitado con otros chunks dentro del small bin (si los hay).
_int_malloc small bin
// From https://github.com/bminor/glibc/blob/f942a732d37a96217ef828116ebe64a644db18d7/malloc/malloc.c#L3895C3-L3967C6
/*
If a small request, check regular bin. Since these "smallbins"
hold one size each, no searching within bins is necessary.
(For a large request, we need to wait until unsorted chunks are
processed to find best fit. But for small ones, fits are exact
anyway, so we can check now, which is faster.)
*/
if (in_smallbin_range (nb))
{
idx = smallbin_index (nb);
bin = bin_at (av, idx);
if ((victim = last (bin)) != bin)
{
bck = victim->bk;
if (__glibc_unlikely (bck->fd != victim))
malloc_printerr ("malloc(): smallbin double linked list corrupted");
set_inuse_bit_at_offset (victim, nb);
bin->bk = bck;
bck->fd = bin;
if (av != &main_arena)
set_non_main_arena (victim);
check_malloced_chunk (av, victim, nb);
#if USE_TCACHE
/* While we're here, if we see other chunks of the same size,
stash them in the tcache. */
size_t tc_idx = csize2tidx (nb);
if (tcache != NULL && tc_idx < mp_.tcache_bins)
{
mchunkptr tc_victim;
/* While bin not empty and tcache not full, copy chunks over. */
while (tcache->counts[tc_idx] < mp_.tcache_count
&& (tc_victim = last (bin)) != bin)
{
if (tc_victim != 0)
{
bck = tc_victim->bk;
set_inuse_bit_at_offset (tc_victim, nb);
if (av != &main_arena)
set_non_main_arena (tc_victim);
bin->bk = bck;
bck->fd = bin;
tcache_put (tc_victim, tc_idx);
}
}
}
#endif
void *p = chunk2mem (victim);
alloc_perturb (p, bytes);
return p;
}
}
malloc_consolidate
Si no era un pequeño fragmento, es un gran fragmento, y en este caso se llama a malloc_consolidate
para evitar la fragmentación de memoria.
llamada a malloc_consolidate
/*
If this is a large request, consolidate fastbins before continuing.
While it might look excessive to kill all fastbins before
even seeing if there is space available, this avoids
fragmentation problems normally associated with fastbins.
Also, in practice, programs tend to have runs of either small or
large requests, but less often mixtures, so consolidation is not
invoked all that often in most programs. And the programs that
it is called frequently in otherwise tend to fragment.
*/
else
{
idx = largebin_index (nb);
if (atomic_load_relaxed (&av->have_fastchunks))
malloc_consolidate (av);
}
La función malloc consolidate básicamente elimina bloques del fast bin y los coloca en el unsorted bin. Después del siguiente malloc, estos bloques se organizarán en sus respectivos small/fast bins.
Tenga en cuenta que si al eliminar estos bloques se encuentran con bloques anteriores o posteriores que no están en uso, serán desvinculados y fusionados antes de colocar el bloque final en el unsorted bin.
Para cada bloque del fast bin se realizan un par de verificaciones de seguridad:
- Si el bloque no está alineado, se activa:
malloc_consolidate(): unaligned fastbin chunk detected
- Si el bloque tiene un tamaño diferente al que debería debido al índice en el que se encuentra:
malloc_consolidate(): invalid chunk size
- Si el bloque anterior no está en uso y el bloque anterior tiene un tamaño diferente al indicado por
prev_chunk
:corrupted size vs. prev_size in fastbins
función malloc_consolidate
// https://github.com/bminor/glibc/blob/f942a732d37a96217ef828116ebe64a644db18d7/malloc/malloc.c#L4810C1-L4905C2
static void malloc_consolidate(mstate av)
{
mfastbinptr* fb; /* current fastbin being consolidated */
mfastbinptr* maxfb; /* last fastbin (for loop control) */
mchunkptr p; /* current chunk being consolidated */
mchunkptr nextp; /* next chunk to consolidate */
mchunkptr unsorted_bin; /* bin header */
mchunkptr first_unsorted; /* chunk to link to */
/* These have same use as in free() */
mchunkptr nextchunk;
INTERNAL_SIZE_T size;
INTERNAL_SIZE_T nextsize;
INTERNAL_SIZE_T prevsize;
int nextinuse;
atomic_store_relaxed (&av->have_fastchunks, false);
unsorted_bin = unsorted_chunks(av);
/*
Remove each chunk from fast bin and consolidate it, placing it
then in unsorted bin. Among other reasons for doing this,
placing in unsorted bin avoids needing to calculate actual bins
until malloc is sure that chunks aren't immediately going to be
reused anyway.
*/
maxfb = &fastbin (av, NFASTBINS - 1);
fb = &fastbin (av, 0);
do {
p = atomic_exchange_acquire (fb, NULL);
if (p != 0) {
do {
{
if (__glibc_unlikely (misaligned_chunk (p)))
malloc_printerr ("malloc_consolidate(): "
"unaligned fastbin chunk detected");
unsigned int idx = fastbin_index (chunksize (p));
if ((&fastbin (av, idx)) != fb)
malloc_printerr ("malloc_consolidate(): invalid chunk size");
}
check_inuse_chunk(av, p);
nextp = REVEAL_PTR (p->fd);
/* Slightly streamlined version of consolidation code in free() */
size = chunksize (p);
nextchunk = chunk_at_offset(p, size);
nextsize = chunksize(nextchunk);
if (!prev_inuse(p)) {
prevsize = prev_size (p);
size += prevsize;
p = chunk_at_offset(p, -((long) prevsize));
if (__glibc_unlikely (chunksize(p) != prevsize))
malloc_printerr ("corrupted size vs. prev_size in fastbins");
unlink_chunk (av, p);
}
if (nextchunk != av->top) {
nextinuse = inuse_bit_at_offset(nextchunk, nextsize);
if (!nextinuse) {
size += nextsize;
unlink_chunk (av, nextchunk);
} else
clear_inuse_bit_at_offset(nextchunk, 0);
first_unsorted = unsorted_bin->fd;
unsorted_bin->fd = p;
first_unsorted->bk = p;
if (!in_smallbin_range (size)) {
p->fd_nextsize = NULL;
p->bk_nextsize = NULL;
}
set_head(p, size | PREV_INUSE);
p->bk = unsorted_bin;
p->fd = first_unsorted;
set_foot(p, size);
}
else {
size += nextsize;
set_head(p, size | PREV_INUSE);
av->top = p;
}
} while ( (p = nextp) != 0);
}
} while (fb++ != maxfb);
}
Unsorted bin
Es hora de verificar el unsorted bin en busca de un chunk potencialmente válido para usar.
Start
Esto comienza con un gran bucle for que recorrerá el unsorted bin en la dirección bk
hasta que llegue al final (la estructura arena) con while ((victim = unsorted_chunks (av)->bk) != unsorted_chunks (av))
Además, se realizan algunas verificaciones de seguridad cada vez que se considera un nuevo chunk:
- Si el tamaño del chunk es extraño (demasiado pequeño o demasiado grande):
malloc(): invalid size (unsorted)
- Si el tamaño del siguiente chunk es extraño (demasiado pequeño o demasiado grande):
malloc(): invalid next size (unsorted)
- Si el tamaño anterior indicado por el siguiente chunk difiere del tamaño del chunk:
malloc(): mismatching next->prev_size (unsorted)
- Si no
victim->bck->fd == victim
o novictim->fd == av
(arena):malloc(): unsorted double linked list corrupted
- Como siempre estamos verificando el último, su
fd
debería estar apuntando siempre a la estructura arena. - Si el siguiente chunk no indica que el anterior está en uso:
malloc(): invalid next->prev_inuse (unsorted)
_int_malloc
unsorted bin start
/*
Process recently freed or remaindered chunks, taking one only if
it is exact fit, or, if this a small request, the chunk is remainder from
the most recent non-exact fit. Place other traversed chunks in
bins. Note that this step is the only place in any routine where
chunks are placed in bins.
The outer loop here is needed because we might not realize until
near the end of malloc that we should have consolidated, so must
do so and retry. This happens at most once, and only when we would
otherwise need to expand memory to service a "small" request.
*/
#if USE_TCACHE
INTERNAL_SIZE_T tcache_nb = 0;
size_t tc_idx = csize2tidx (nb);
if (tcache != NULL && tc_idx < mp_.tcache_bins)
tcache_nb = nb;
int return_cached = 0;
tcache_unsorted_count = 0;
#endif
for (;; )
{
int iters = 0;
while ((victim = unsorted_chunks (av)->bk) != unsorted_chunks (av))
{
bck = victim->bk;
size = chunksize (victim);
mchunkptr next = chunk_at_offset (victim, size);
if (__glibc_unlikely (size <= CHUNK_HDR_SZ)
|| __glibc_unlikely (size > av->system_mem))
malloc_printerr ("malloc(): invalid size (unsorted)");
if (__glibc_unlikely (chunksize_nomask (next) < CHUNK_HDR_SZ)
|| __glibc_unlikely (chunksize_nomask (next) > av->system_mem))
malloc_printerr ("malloc(): invalid next size (unsorted)");
if (__glibc_unlikely ((prev_size (next) & ~(SIZE_BITS)) != size))
malloc_printerr ("malloc(): mismatching next->prev_size (unsorted)");
if (__glibc_unlikely (bck->fd != victim)
|| __glibc_unlikely (victim->fd != unsorted_chunks (av)))
malloc_printerr ("malloc(): unsorted double linked list corrupted");
if (__glibc_unlikely (prev_inuse (next)))
malloc_printerr ("malloc(): invalid next->prev_inuse (unsorted)");
si in_smallbin_range
Si el chunk es más grande que el tamaño solicitado, úsalo y coloca el resto del espacio del chunk en la lista no ordenada y actualiza el last_remainder
con él.
_int_malloc
bin no ordenado in_smallbin_range
// From https://github.com/bminor/glibc/blob/master/malloc/malloc.c#L4090C11-L4124C14
/*
If a small request, try to use last remainder if it is the
only chunk in unsorted bin. This helps promote locality for
runs of consecutive small requests. This is the only
exception to best-fit, and applies only when there is
no exact fit for a small chunk.
*/
if (in_smallbin_range (nb) &&
bck == unsorted_chunks (av) &&
victim == av->last_remainder &&
(unsigned long) (size) > (unsigned long) (nb + MINSIZE))
{
/* split and reattach remainder */
remainder_size = size - nb;
remainder = chunk_at_offset (victim, nb);
unsorted_chunks (av)->bk = unsorted_chunks (av)->fd = remainder;
av->last_remainder = remainder;
remainder->bk = remainder->fd = unsorted_chunks (av);
if (!in_smallbin_range (remainder_size))
{
remainder->fd_nextsize = NULL;
remainder->bk_nextsize = NULL;
}
set_head (victim, nb | PREV_INUSE |
(av != &main_arena ? NON_MAIN_ARENA : 0));
set_head (remainder, remainder_size | PREV_INUSE);
set_foot (remainder, remainder_size);
check_malloced_chunk (av, victim, nb);
void *p = chunk2mem (victim);
alloc_perturb (p, bytes);
return p;
}
Si esto fue exitoso, devuelve el chunk y se acabó, si no, continúa ejecutando la función...
si tamaño igual
Continúa eliminando el chunk del bin, en caso de que el tamaño solicitado sea exactamente el del chunk:
- Si el tcache no está lleno, agrégalo al tcache y continúa indicando que hay un chunk de tcache que podría ser utilizado
- Si el tcache está lleno, simplemente úsalo devolviéndolo
_int_malloc
bin desordenado tamaño igual
// From https://github.com/bminor/glibc/blob/master/malloc/malloc.c#L4126C11-L4157C14
/* remove from unsorted list */
unsorted_chunks (av)->bk = bck;
bck->fd = unsorted_chunks (av);
/* Take now instead of binning if exact fit */
if (size == nb)
{
set_inuse_bit_at_offset (victim, size);
if (av != &main_arena)
set_non_main_arena (victim);
#if USE_TCACHE
/* Fill cache first, return to user only if cache fills.
We may return one of these chunks later. */
if (tcache_nb > 0
&& tcache->counts[tc_idx] < mp_.tcache_count)
{
tcache_put (victim, tc_idx);
return_cached = 1;
continue;
}
else
{
#endif
check_malloced_chunk (av, victim, nb);
void *p = chunk2mem (victim);
alloc_perturb (p, bytes);
return p;
#if USE_TCACHE
}
#endif
}
Si el chunk no se devuelve o se añade a tcache, continúa con el código...
colocar chunk en un bin
Almacena el chunk verificado en el bin pequeño o en el bin grande según el tamaño del chunk (manteniendo el bin grande correctamente organizado).
Se están realizando verificaciones de seguridad para asegurarse de que ambas listas doblemente enlazadas del bin grande no estén corruptas:
- Si
fwd->bk_nextsize->fd_nextsize != fwd
:malloc(): largebin double linked list corrupted (nextsize)
- Si
fwd->bk->fd != fwd
:malloc(): largebin double linked list corrupted (bk)
_int_malloc
colocar chunk en un bin
/* place chunk in bin */
if (in_smallbin_range (size))
{
victim_index = smallbin_index (size);
bck = bin_at (av, victim_index);
fwd = bck->fd;
}
else
{
victim_index = largebin_index (size);
bck = bin_at (av, victim_index);
fwd = bck->fd;
/* maintain large bins in sorted order */
if (fwd != bck)
{
/* Or with inuse bit to speed comparisons */
size |= PREV_INUSE;
/* if smaller than smallest, bypass loop below */
assert (chunk_main_arena (bck->bk));
if ((unsigned long) (size)
< (unsigned long) chunksize_nomask (bck->bk))
{
fwd = bck;
bck = bck->bk;
victim->fd_nextsize = fwd->fd;
victim->bk_nextsize = fwd->fd->bk_nextsize;
fwd->fd->bk_nextsize = victim->bk_nextsize->fd_nextsize = victim;
}
else
{
assert (chunk_main_arena (fwd));
while ((unsigned long) size < chunksize_nomask (fwd))
{
fwd = fwd->fd_nextsize;
assert (chunk_main_arena (fwd));
}
if ((unsigned long) size
== (unsigned long) chunksize_nomask (fwd))
/* Always insert in the second position. */
fwd = fwd->fd;
else
{
victim->fd_nextsize = fwd;
victim->bk_nextsize = fwd->bk_nextsize;
if (__glibc_unlikely (fwd->bk_nextsize->fd_nextsize != fwd))
malloc_printerr ("malloc(): largebin double linked list corrupted (nextsize)");
fwd->bk_nextsize = victim;
victim->bk_nextsize->fd_nextsize = victim;
}
bck = fwd->bk;
if (bck->fd != fwd)
malloc_printerr ("malloc(): largebin double linked list corrupted (bk)");
}
}
else
victim->fd_nextsize = victim->bk_nextsize = victim;
}
mark_bin (av, victim_index);
victim->bk = bck;
victim->fd = fwd;
fwd->bk = victim;
bck->fd = victim;
Límites de _int_malloc
En este punto, si algún chunk fue almacenado en el tcache que se puede usar y se alcanza el límite, simplemente devuelve un chunk del tcache.
Además, si se alcanza MAX_ITERS, sal del bucle y obtén un chunk de otra manera (top chunk).
Si return_cached
fue establecido, simplemente devuelve un chunk del tcache para evitar búsquedas más grandes.
_int_malloc
límites
// From https://github.com/bminor/glibc/blob/master/malloc/malloc.c#L4227C1-L4250C7
#if USE_TCACHE
/* If we've processed as many chunks as we're allowed while
filling the cache, return one of the cached ones. */
++tcache_unsorted_count;
if (return_cached
&& mp_.tcache_unsorted_limit > 0
&& tcache_unsorted_count > mp_.tcache_unsorted_limit)
{
return tcache_get (tc_idx);
}
#endif
#define MAX_ITERS 10000
if (++iters >= MAX_ITERS)
break;
}
#if USE_TCACHE
/* If all the small chunks we found ended up cached, return one now. */
if (return_cached)
{
return tcache_get (tc_idx);
}
#endif
Si no se alcanzan los límites, continúa con el código...
Large Bin (por índice)
Si la solicitud es grande (no en small bin) y aún no hemos devuelto ningún chunk, obtén el índice del tamaño solicitado en el large bin, verifica si no está vacío o si el chunk más grande en este bin es más grande que el tamaño solicitado y en ese caso encuentra el chunk más pequeño que se puede usar para el tamaño solicitado.
Si el espacio restante del chunk finalmente utilizado puede ser un nuevo chunk, agrégalo al unsorted bin y se actualiza last_reminder.
Se realiza una verificación de seguridad al agregar el recordatorio al unsorted bin:
bck->fd-> bk != bck
:malloc(): corrupted unsorted chunks
_int_malloc
Large bin (por índice)
// From https://github.com/bminor/glibc/blob/master/malloc/malloc.c#L4252C7-L4317C10
/*
If a large request, scan through the chunks of current bin in
sorted order to find smallest that fits. Use the skip list for this.
*/
if (!in_smallbin_range (nb))
{
bin = bin_at (av, idx);
/* skip scan if empty or largest chunk is too small */
if ((victim = first (bin)) != bin
&& (unsigned long) chunksize_nomask (victim)
>= (unsigned long) (nb))
{
victim = victim->bk_nextsize;
while (((unsigned long) (size = chunksize (victim)) <
(unsigned long) (nb)))
victim = victim->bk_nextsize;
/* Avoid removing the first entry for a size so that the skip
list does not have to be rerouted. */
if (victim != last (bin)
&& chunksize_nomask (victim)
== chunksize_nomask (victim->fd))
victim = victim->fd;
remainder_size = size - nb;
unlink_chunk (av, victim);
/* Exhaust */
if (remainder_size < MINSIZE)
{
set_inuse_bit_at_offset (victim, size);
if (av != &main_arena)
set_non_main_arena (victim);
}
/* Split */
else
{
remainder = chunk_at_offset (victim, nb);
/* We cannot assume the unsorted list is empty and therefore
have to perform a complete insert here. */
bck = unsorted_chunks (av);
fwd = bck->fd;
if (__glibc_unlikely (fwd->bk != bck))
malloc_printerr ("malloc(): corrupted unsorted chunks");
last_re->bk = bck;
remainder->fd = fwd;
bck->fd = remainder;
fwd->bk = remainder;
if (!in_smallbin_range (remainder_size))
{
remainder->fd_nextsize = NULL;
remainder->bk_nextsize = NULL;
}
set_head (victim, nb | PREV_INUSE |
(av != &main_arena ? NON_MAIN_ARENA : 0));
set_head (remainder, remainder_size | PREV_INUSE);
set_foot (remainder, remainder_size);
}
check_malloced_chunk (av, victim, nb);
void *p = chunk2mem (victim);
alloc_perturb (p, bytes);
return p;
}
}
Si no se encuentra un chunk adecuado para esto, continúa
Gran Bin (siguiente más grande)
Si en el gran bin exacto no había ningún chunk que pudiera ser utilizado, comienza a recorrer todos los siguientes grandes bins (comenzando por el inmediatamente más grande) hasta que se encuentre uno (si es que hay).
El recordatorio del chunk dividido se agrega en el bin no ordenado, last_reminder se actualiza y se realiza la misma verificación de seguridad:
bck->fd-> bk != bck
:malloc(): corrupted unsorted chunks2
_int_malloc
Gran bin (siguiente más grande)
// From https://github.com/bminor/glibc/blob/master/malloc/malloc.c#L4319C7-L4425C10
/*
Search for a chunk by scanning bins, starting with next largest
bin. This search is strictly by best-fit; i.e., the smallest
(with ties going to approximately the least recently used) chunk
that fits is selected.
The bitmap avoids needing to check that most blocks are nonempty.
The particular case of skipping all bins during warm-up phases
when no chunks have been returned yet is faster than it might look.
*/
++idx;
bin = bin_at (av, idx);
block = idx2block (idx);
map = av->binmap[block];
bit = idx2bit (idx);
for (;; )
{
/* Skip rest of block if there are no more set bits in this block. */
if (bit > map || bit == 0)
{
do
{
if (++block >= BINMAPSIZE) /* out of bins */
goto use_top;
}
while ((map = av->binmap[block]) == 0);
bin = bin_at (av, (block << BINMAPSHIFT));
bit = 1;
}
/* Advance to bin with set bit. There must be one. */
while ((bit & map) == 0)
{
bin = next_bin (bin);
bit <<= 1;
assert (bit != 0);
}
/* Inspect the bin. It is likely to be non-empty */
victim = last (bin);
/* If a false alarm (empty bin), clear the bit. */
if (victim == bin)
{
av->binmap[block] = map &= ~bit; /* Write through */
bin = next_bin (bin);
bit <<= 1;
}
else
{
size = chunksize (victim);
/* We know the first chunk in this bin is big enough to use. */
assert ((unsigned long) (size) >= (unsigned long) (nb));
remainder_size = size - nb;
/* unlink */
unlink_chunk (av, victim);
/* Exhaust */
if (remainder_size < MINSIZE)
{
set_inuse_bit_at_offset (victim, size);
if (av != &main_arena)
set_non_main_arena (victim);
}
/* Split */
else
{
remainder = chunk_at_offset (victim, nb);
/* We cannot assume the unsorted list is empty and therefore
have to perform a complete insert here. */
bck = unsorted_chunks (av);
fwd = bck->fd;
if (__glibc_unlikely (fwd->bk != bck))
malloc_printerr ("malloc(): corrupted unsorted chunks 2");
remainder->bk = bck;
remainder->fd = fwd;
bck->fd = remainder;
fwd->bk = remainder;
/* advertise as last remainder */
if (in_smallbin_range (nb))
av->last_remainder = remainder;
if (!in_smallbin_range (remainder_size))
{
remainder->fd_nextsize = NULL;
remainder->bk_nextsize = NULL;
}
set_head (victim, nb | PREV_INUSE |
(av != &main_arena ? NON_MAIN_ARENA : 0));
set_head (remainder, remainder_size | PREV_INUSE);
set_foot (remainder, remainder_size);
}
check_malloced_chunk (av, victim, nb);
void *p = chunk2mem (victim);
alloc_perturb (p, bytes);
return p;
}
}
Top Chunk
En este punto, es hora de obtener un nuevo chunk del Top chunk (si es lo suficientemente grande).
Comienza con una verificación de seguridad asegurándose de que el tamaño del chunk no sea demasiado grande (corrompido):
chunksize(av->top) > av->system_mem
:malloc(): corrupted top size
Luego, utilizará el espacio del top chunk si es lo suficientemente grande para crear un chunk del tamaño solicitado.
Si no, si hay chunks rápidos, consólidalos y vuelve a intentarlo.
Finalmente, si no hay suficiente espacio, utiliza sysmalloc
para asignar el tamaño necesario.
_int_malloc
Top chunk
use_top:
/*
If large enough, split off the chunk bordering the end of memory
(held in av->top). Note that this is in accord with the best-fit
search rule. In effect, av->top is treated as larger (and thus
less well fitting) than any other available chunk since it can
be extended to be as large as necessary (up to system
limitations).
We require that av->top always exists (i.e., has size >=
MINSIZE) after initialization, so if it would otherwise be
exhausted by current request, it is replenished. (The main
reason for ensuring it exists is that we may need MINSIZE space
to put in fenceposts in sysmalloc.)
*/
victim = av->top;
size = chunksize (victim);
if (__glibc_unlikely (size > av->system_mem))
malloc_printerr ("malloc(): corrupted top size");
if ((unsigned long) (size) >= (unsigned long) (nb + MINSIZE))
{
remainder_size = size - nb;
remainder = chunk_at_offset (victim, nb);
av->top = remainder;
set_head (victim, nb | PREV_INUSE |
(av != &main_arena ? NON_MAIN_ARENA : 0));
set_head (remainder, remainder_size | PREV_INUSE);
check_malloced_chunk (av, victim, nb);
void *p = chunk2mem (victim);
alloc_perturb (p, bytes);
return p;
}
/* When we are using atomic ops to free fast chunks we can get
here for all block sizes. */
else if (atomic_load_relaxed (&av->have_fastchunks))
{
malloc_consolidate (av);
/* restore original bin index */
if (in_smallbin_range (nb))
idx = smallbin_index (nb);
else
idx = largebin_index (nb);
}
/*
Otherwise, relay to handle system-dependent cases
*/
else
{
void *p = sysmalloc (nb, av);
if (p != NULL)
alloc_perturb (p, bytes);
return p;
}
}
}
sysmalloc
sysmalloc inicio
Si arena es nula o el tamaño solicitado es demasiado grande (y quedan mmaps permitidos) usa sysmalloc_mmap
para asignar espacio y devolverlo.
inicio de sysmalloc
// From https://github.com/bminor/glibc/blob/f942a732d37a96217ef828116ebe64a644db18d7/malloc/malloc.c#L2531
/*
sysmalloc handles malloc cases requiring more memory from the system.
On entry, it is assumed that av->top does not have enough
space to service request for nb bytes, thus requiring that av->top
be extended or replaced.
*/
static void *
sysmalloc (INTERNAL_SIZE_T nb, mstate av)
{
mchunkptr old_top; /* incoming value of av->top */
INTERNAL_SIZE_T old_size; /* its size */
char *old_end; /* its end address */
long size; /* arg to first MORECORE or mmap call */
char *brk; /* return value from MORECORE */
long correction; /* arg to 2nd MORECORE call */
char *snd_brk; /* 2nd return val */
INTERNAL_SIZE_T front_misalign; /* unusable bytes at front of new space */
INTERNAL_SIZE_T end_misalign; /* partial page left at end of new space */
char *aligned_brk; /* aligned offset into brk */
mchunkptr p; /* the allocated/returned chunk */
mchunkptr remainder; /* remainder from allocation */
unsigned long remainder_size; /* its size */
size_t pagesize = GLRO (dl_pagesize);
bool tried_mmap = false;
/*
If have mmap, and the request size meets the mmap threshold, and
the system supports mmap, and there are few enough currently
allocated mmapped regions, try to directly map this request
rather than expanding top.
*/
if (av == NULL
|| ((unsigned long) (nb) >= (unsigned long) (mp_.mmap_threshold)
&& (mp_.n_mmaps < mp_.n_mmaps_max)))
{
char *mm;
if (mp_.hp_pagesize > 0 && nb >= mp_.hp_pagesize)
{
/* There is no need to issue the THP madvise call if Huge Pages are
used directly. */
mm = sysmalloc_mmap (nb, mp_.hp_pagesize, mp_.hp_flags, av);
if (mm != MAP_FAILED)
return mm;
}
mm = sysmalloc_mmap (nb, pagesize, 0, av);
if (mm != MAP_FAILED)
return mm;
tried_mmap = true;
}
/* There are no usable arenas and mmap also failed. */
if (av == NULL)
return 0;
sysmalloc checks
Comienza obteniendo información del antiguo chunk superior y verificando que algunas de las siguientes condiciones sean verdaderas:
- El tamaño del antiguo heap es 0 (nuevo heap)
- El tamaño del heap anterior es mayor que MINSIZE y el antiguo Top está en uso
- El heap está alineado al tamaño de página (0x1000, por lo que los 12 bits inferiores deben ser 0)
Luego también verifica que:
- El tamaño antiguo no tiene suficiente espacio para crear un chunk para el tamaño solicitado
sysmalloc checks
/* Record incoming configuration of top */
old_top = av->top;
old_size = chunksize (old_top);
old_end = (char *) (chunk_at_offset (old_top, old_size));
brk = snd_brk = (char *) (MORECORE_FAILURE);
/*
If not the first time through, we require old_size to be
at least MINSIZE and to have prev_inuse set.
*/
assert ((old_top == initial_top (av) && old_size == 0) ||
((unsigned long) (old_size) >= MINSIZE &&
prev_inuse (old_top) &&
((unsigned long) old_end & (pagesize - 1)) == 0));
/* Precondition: not enough current space to satisfy nb request */
assert ((unsigned long) (old_size) < (unsigned long) (nb + MINSIZE));
sysmalloc no arena principal
Primero intentará extender el heap anterior para este heap. Si no es posible, intentará asignar un nuevo heap y actualizar los punteros para poder usarlo.
Finalmente, si eso no funcionó, intentará llamar a sysmalloc_mmap
.
sysmalloc no arena principal
if (av != &main_arena)
{
heap_info *old_heap, *heap;
size_t old_heap_size;
/* First try to extend the current heap. */
old_heap = heap_for_ptr (old_top);
old_heap_size = old_heap->size;
if ((long) (MINSIZE + nb - old_size) > 0
&& grow_heap (old_heap, MINSIZE + nb - old_size) == 0)
{
av->system_mem += old_heap->size - old_heap_size;
set_head (old_top, (((char *) old_heap + old_heap->size) - (char *) old_top)
| PREV_INUSE);
}
else if ((heap = new_heap (nb + (MINSIZE + sizeof (*heap)), mp_.top_pad)))
{
/* Use a newly allocated heap. */
heap->ar_ptr = av;
heap->prev = old_heap;
av->system_mem += heap->size;
/* Set up the new top. */
top (av) = chunk_at_offset (heap, sizeof (*heap));
set_head (top (av), (heap->size - sizeof (*heap)) | PREV_INUSE);
/* Setup fencepost and free the old top chunk with a multiple of
MALLOC_ALIGNMENT in size. */
/* The fencepost takes at least MINSIZE bytes, because it might
become the top chunk again later. Note that a footer is set
up, too, although the chunk is marked in use. */
old_size = (old_size - MINSIZE) & ~MALLOC_ALIGN_MASK;
set_head (chunk_at_offset (old_top, old_size + CHUNK_HDR_SZ),
0 | PREV_INUSE);
if (old_size >= MINSIZE)
{
set_head (chunk_at_offset (old_top, old_size),
CHUNK_HDR_SZ | PREV_INUSE);
set_foot (chunk_at_offset (old_top, old_size), CHUNK_HDR_SZ);
set_head (old_top, old_size | PREV_INUSE | NON_MAIN_ARENA);
_int_free (av, old_top, 1);
}
else
{
set_head (old_top, (old_size + CHUNK_HDR_SZ) | PREV_INUSE);
set_foot (old_top, (old_size + CHUNK_HDR_SZ));
}
}
else if (!tried_mmap)
{
/* We can at least try to use to mmap memory. If new_heap fails
it is unlikely that trying to allocate huge pages will
succeed. */
char *mm = sysmalloc_mmap (nb, pagesize, 0, av);
if (mm != MAP_FAILED)
return mm;
}
}
sysmalloc main arena
Comienza calculando la cantidad de memoria necesaria. Comenzará solicitando memoria contigua, por lo que en este caso será posible utilizar la memoria antigua no utilizada. También se realizan algunas operaciones de alineación.
sysmalloc main arena
// From https://github.com/bminor/glibc/blob/f942a732d37a96217ef828116ebe64a644db18d7/malloc/malloc.c#L2665C1-L2713C10
else /* av == main_arena */
{ /* Request enough space for nb + pad + overhead */
size = nb + mp_.top_pad + MINSIZE;
/*
If contiguous, we can subtract out existing space that we hope to
combine with new space. We add it back later only if
we don't actually get contiguous space.
*/
if (contiguous (av))
size -= old_size;
/*
Round to a multiple of page size or huge page size.
If MORECORE is not contiguous, this ensures that we only call it
with whole-page arguments. And if MORECORE is contiguous and
this is not first time through, this preserves page-alignment of
previous calls. Otherwise, we correct to page-align below.
*/
#ifdef MADV_HUGEPAGE
/* Defined in brk.c. */
extern void *__curbrk;
if (__glibc_unlikely (mp_.thp_pagesize != 0))
{
uintptr_t top = ALIGN_UP ((uintptr_t) __curbrk + size,
mp_.thp_pagesize);
size = top - (uintptr_t) __curbrk;
}
else
#endif
size = ALIGN_UP (size, GLRO(dl_pagesize));
/*
Don't try to call MORECORE if argument is so big as to appear
negative. Note that since mmap takes size_t arg, it may succeed
below even if we cannot call MORECORE.
*/
if (size > 0)
{
brk = (char *) (MORECORE (size));
if (brk != (char *) (MORECORE_FAILURE))
madvise_thp (brk, size);
LIBC_PROBE (memory_sbrk_more, 2, brk, size);
}
sysmalloc error anterior de la arena principal 1
Si el anterior devolvió MORECORE_FAILURE
, intenta nuevamente asignar memoria usando sysmalloc_mmap_fallback
sysmalloc
error anterior de la arena principal 1
// From https://github.com/bminor/glibc/blob/f942a732d37a96217ef828116ebe64a644db18d7/malloc/malloc.c#L2715C7-L2740C10
if (brk == (char *) (MORECORE_FAILURE))
{
/*
If have mmap, try using it as a backup when MORECORE fails or
cannot be used. This is worth doing on systems that have "holes" in
address space, so sbrk cannot extend to give contiguous space, but
space is available elsewhere. Note that we ignore mmap max count
and threshold limits, since the space will not be used as a
segregated mmap region.
*/
char *mbrk = MAP_FAILED;
if (mp_.hp_pagesize > 0)
mbrk = sysmalloc_mmap_fallback (&size, nb, old_size,
mp_.hp_pagesize, mp_.hp_pagesize,
mp_.hp_flags, av);
if (mbrk == MAP_FAILED)
mbrk = sysmalloc_mmap_fallback (&size, nb, old_size, MMAP_AS_MORECORE_SIZE,
pagesize, 0, av);
if (mbrk != MAP_FAILED)
{
/* We do not need, and cannot use, another sbrk call to find end */
brk = mbrk;
snd_brk = brk + size;
}
}
sysmalloc main arena continuar
Si lo anterior no devolvió MORECORE_FAILURE
, si funcionó, crea algunas alineaciones:
sysmalloc main arena error anterior 2
// From https://github.com/bminor/glibc/blob/f942a732d37a96217ef828116ebe64a644db18d7/malloc/malloc.c#L2742
if (brk != (char *) (MORECORE_FAILURE))
{
if (mp_.sbrk_base == 0)
mp_.sbrk_base = brk;
av->system_mem += size;
/*
If MORECORE extends previous space, we can likewise extend top size.
*/
if (brk == old_end && snd_brk == (char *) (MORECORE_FAILURE))
set_head (old_top, (size + old_size) | PREV_INUSE);
else if (contiguous (av) && old_size && brk < old_end)
/* Oops! Someone else killed our space.. Can't touch anything. */
malloc_printerr ("break adjusted to free malloc space");
/*
Otherwise, make adjustments:
* If the first time through or noncontiguous, we need to call sbrk
just to find out where the end of memory lies.
* We need to ensure that all returned chunks from malloc will meet
MALLOC_ALIGNMENT
* If there was an intervening foreign sbrk, we need to adjust sbrk
request size to account for fact that we will not be able to
combine new space with existing space in old_top.
* Almost all systems internally allocate whole pages at a time, in
which case we might as well use the whole last page of request.
So we allocate enough more memory to hit a page boundary now,
which in turn causes future contiguous calls to page-align.
*/
else
{
front_misalign = 0;
end_misalign = 0;
correction = 0;
aligned_brk = brk;
/* handle contiguous cases */
if (contiguous (av))
{
/* Count foreign sbrk as system_mem. */
if (old_size)
av->system_mem += brk - old_end;
/* Guarantee alignment of first new chunk made from this space */
front_misalign = (INTERNAL_SIZE_T) chunk2mem (brk) & MALLOC_ALIGN_MASK;
if (front_misalign > 0)
{
/*
Skip over some bytes to arrive at an aligned position.
We don't need to specially mark these wasted front bytes.
They will never be accessed anyway because
prev_inuse of av->top (and any chunk created from its start)
is always true after initialization.
*/
correction = MALLOC_ALIGNMENT - front_misalign;
aligned_brk += correction;
}
/*
If this isn't adjacent to existing space, then we will not
be able to merge with old_top space, so must add to 2nd request.
*/
correction += old_size;
/* Extend the end address to hit a page boundary */
end_misalign = (INTERNAL_SIZE_T) (brk + size + correction);
correction += (ALIGN_UP (end_misalign, pagesize)) - end_misalign;
assert (correction >= 0);
snd_brk = (char *) (MORECORE (correction));
/*
If can't allocate correction, try to at least find out current
brk. It might be enough to proceed without failing.
Note that if second sbrk did NOT fail, we assume that space
is contiguous with first sbrk. This is a safe assumption unless
program is multithreaded but doesn't use locks and a foreign sbrk
occurred between our first and second calls.
*/
if (snd_brk == (char *) (MORECORE_FAILURE))
{
correction = 0;
snd_brk = (char *) (MORECORE (0));
}
else
madvise_thp (snd_brk, correction);
}
/* handle non-contiguous cases */
else
{
if (MALLOC_ALIGNMENT == CHUNK_HDR_SZ)
/* MORECORE/mmap must correctly align */
assert (((unsigned long) chunk2mem (brk) & MALLOC_ALIGN_MASK) == 0);
else
{
front_misalign = (INTERNAL_SIZE_T) chunk2mem (brk) & MALLOC_ALIGN_MASK;
if (front_misalign > 0)
{
/*
Skip over some bytes to arrive at an aligned position.
We don't need to specially mark these wasted front bytes.
They will never be accessed anyway because
prev_inuse of av->top (and any chunk created from its start)
is always true after initialization.
*/
aligned_brk += MALLOC_ALIGNMENT - front_misalign;
}
}
/* Find out current end of memory */
if (snd_brk == (char *) (MORECORE_FAILURE))
{
snd_brk = (char *) (MORECORE (0));
}
}
/* Adjust top based on results of second sbrk */
if (snd_brk != (char *) (MORECORE_FAILURE))
{
av->top = (mchunkptr) aligned_brk;
set_head (av->top, (snd_brk - aligned_brk + correction) | PREV_INUSE);
av->system_mem += correction;
/*
If not the first time through, we either have a
gap due to foreign sbrk or a non-contiguous region. Insert a
double fencepost at old_top to prevent consolidation with space
we don't own. These fenceposts are artificial chunks that are
marked as inuse and are in any case too small to use. We need
two to make sizes and alignments work out.
*/
if (old_size != 0)
{
/*
Shrink old_top to insert fenceposts, keeping size a
multiple of MALLOC_ALIGNMENT. We know there is at least
enough space in old_top to do this.
*/
old_size = (old_size - 2 * CHUNK_HDR_SZ) & ~MALLOC_ALIGN_MASK;
set_head (old_top, old_size | PREV_INUSE);
/*
Note that the following assignments completely overwrite
old_top when old_size was previously MINSIZE. This is
intentional. We need the fencepost, even if old_top otherwise gets
lost.
*/
set_head (chunk_at_offset (old_top, old_size),
CHUNK_HDR_SZ | PREV_INUSE);
set_head (chunk_at_offset (old_top,
old_size + CHUNK_HDR_SZ),
CHUNK_HDR_SZ | PREV_INUSE);
/* If possible, release the rest. */
if (old_size >= MINSIZE)
{
_int_free (av, old_top, 1);
}
}
}
}
}
} /* if (av != &main_arena) */
sysmalloc finale
Termina la asignación actualizando la información de la arena.
// From https://github.com/bminor/glibc/blob/f942a732d37a96217ef828116ebe64a644db18d7/malloc/malloc.c#L2921C3-L2943C12
if ((unsigned long) av->system_mem > (unsigned long) (av->max_system_mem))
av->max_system_mem = av->system_mem;
check_malloc_state (av);
/* finally, do the allocation */
p = av->top;
size = chunksize (p);
/* check that one of the above allocation paths succeeded */
if ((unsigned long) (size) >= (unsigned long) (nb + MINSIZE))
{
remainder_size = size - nb;
remainder = chunk_at_offset (p, nb);
av->top = remainder;
set_head (p, nb | PREV_INUSE | (av != &main_arena ? NON_MAIN_ARENA : 0));
set_head (remainder, remainder_size | PREV_INUSE);
check_malloced_chunk (av, p, nb);
return chunk2mem (p);
}
/* catch all failure paths */
__set_errno (ENOMEM);
return 0;
sysmalloc_mmap
código sysmalloc_mmap
// From https://github.com/bminor/glibc/blob/f942a732d37a96217ef828116ebe64a644db18d7/malloc/malloc.c#L2392C1-L2481C2
static void *
sysmalloc_mmap (INTERNAL_SIZE_T nb, size_t pagesize, int extra_flags, mstate av)
{
long int size;
/*
Round up size to nearest page. For mmapped chunks, the overhead is one
SIZE_SZ unit larger than for normal chunks, because there is no
following chunk whose prev_size field could be used.
See the front_misalign handling below, for glibc there is no need for
further alignments unless we have have high alignment.
*/
if (MALLOC_ALIGNMENT == CHUNK_HDR_SZ)
size = ALIGN_UP (nb + SIZE_SZ, pagesize);
else
size = ALIGN_UP (nb + SIZE_SZ + MALLOC_ALIGN_MASK, pagesize);
/* Don't try if size wraps around 0. */
if ((unsigned long) (size) <= (unsigned long) (nb))
return MAP_FAILED;
char *mm = (char *) MMAP (0, size,
mtag_mmap_flags | PROT_READ | PROT_WRITE,
extra_flags);
if (mm == MAP_FAILED)
return mm;
#ifdef MAP_HUGETLB
if (!(extra_flags & MAP_HUGETLB))
madvise_thp (mm, size);
#endif
__set_vma_name (mm, size, " glibc: malloc");
/*
The offset to the start of the mmapped region is stored in the prev_size
field of the chunk. This allows us to adjust returned start address to
meet alignment requirements here and in memalign(), and still be able to
compute proper address argument for later munmap in free() and realloc().
*/
INTERNAL_SIZE_T front_misalign; /* unusable bytes at front of new space */
if (MALLOC_ALIGNMENT == CHUNK_HDR_SZ)
{
/* For glibc, chunk2mem increases the address by CHUNK_HDR_SZ and
MALLOC_ALIGN_MASK is CHUNK_HDR_SZ-1. Each mmap'ed area is page
aligned and therefore definitely MALLOC_ALIGN_MASK-aligned. */
assert (((INTERNAL_SIZE_T) chunk2mem (mm) & MALLOC_ALIGN_MASK) == 0);
front_misalign = 0;
}
else
front_misalign = (INTERNAL_SIZE_T) chunk2mem (mm) & MALLOC_ALIGN_MASK;
mchunkptr p; /* the allocated/returned chunk */
if (front_misalign > 0)
{
ptrdiff_t correction = MALLOC_ALIGNMENT - front_misalign;
p = (mchunkptr) (mm + correction);
set_prev_size (p, correction);
set_head (p, (size - correction) | IS_MMAPPED);
}
else
{
p = (mchunkptr) mm;
set_prev_size (p, 0);
set_head (p, size | IS_MMAPPED);
}
/* update statistics */
int new = atomic_fetch_add_relaxed (&mp_.n_mmaps, 1) + 1;
atomic_max (&mp_.max_n_mmaps, new);
unsigned long sum;
sum = atomic_fetch_add_relaxed (&mp_.mmapped_mem, size) + size;
atomic_max (&mp_.max_mmapped_mem, sum);
check_chunk (av, p);
return chunk2mem (p);
}
tip
Aprende y practica AWS Hacking:HackTricks Training AWS Red Team Expert (ARTE)
Aprende y practica GCP Hacking: HackTricks Training GCP Red Team Expert (GRTE)
Apoya a HackTricks
- Revisa los planes de suscripción!
- Únete al 💬 grupo de Discord o al grupo de telegram o síguenos en Twitter 🐦 @hacktricks_live.
- Comparte trucos de hacking enviando PRs a HackTricks y HackTricks Cloud repos de github.